|
AUX/HEG UPGRADE (710-002) You do not need to purchase a new 2E module to run HEG if you presently own a BrainMaster. Now you can immediately add the AUX upgrade to your existing or new
device. Provides the ability to read in an auxiliary (AUX) channel of data and display them as feedback signals. Existing 2E modules can be fitted with the option for acquir-ing AUX data through a hardware
modification performed at the BrainMaster facility. Units upgraded in this way will have additional connections installed in the equipment, and will also have modification to the software code that runs inside the
mod-ule. With this upgrade, the 2.0 or 2.5 software will be able to recognize the AUX option, and read data from the auxiliary device. Users will need to acquire the HEG (Hemoencephalography) from BioComp Institute
who is the manufacturer of the HEG hardware and responsible for instrumentation and all aspects of its use, service and interpretation. BrainMaster 2E modules being upgraded must have been upgraded with Super Input
amplifiers or have serial number 1600 and above. Call for informa-tion. Investigational and research use only. Obtain an RGA number from BrainMaster prior to shipping. All newly purchased BrainMaster devices (SN
3100 and above) in-clude AUX/HEG at no additional fee. $350.00 ($125.00)
SUPERINPUT AMPLIFIER UPGRADE (710-001) Amplifiers (2E module) with serial numbers below 1200 may now upgrade their Brain-
Master Module 2E EEG systems to boast a minimum input impedance of 1000 Gig ohms, and common mode rejection ratio (CMRR) of 120dB. Until now only the high-est cost medical EEG
systems have been able to provide this quality performance. Cleaner EEG signals; minimum electrode preparation; better noise free & artifact free signals! Includes 30-day parts & labor
warranty on trade in. Includes specs of Linear Update (710-005). To send in your unit, call for a RGA number today. Each: $450.00 ($350.00)
SUPERAMP “LINEAR” UPDATE (710-005) This update is applicable to BrainMaster 2E Modules with Serial Numbers between 1200
and 3050, or earlier units that have previously had “Superamp” upgrade. These units currently have an input impedance of 10 GOhms and CMRR of 100 dB minimums.The “Linear” update
increases input impedance to 1000 GOhms, and CMRR to 120 dB minimum. Thus, input noise and interference is reduced overall by a factor of more than 1000. This updates the modules to the
best, most recent specifications for these input characteristics and provides optimal performance for clean EEG signals and ease of use. Note: These specs are now provided with the latest Super
Input ampli-fier upgrade (710-001). Contact BrainMaster Technologies for a Return Goods Authorization (RGA) and to arrange for this update. Each: $100.00 ($50.00)
2E WIDEBAND UPGRADE Users may upgrade existing 2 E Modules, (Serial Number 1200 and above). 2E WIDE-BAND
modules consist of 2 high quality EEG amplifiers. Input impedance: 1000 GOhms; sampling accuracy: 0.4 microvolts; operating bandwidth: 0.5-64.0 Hz and is intended to be sampled at a
rate of 256 samples per second or faster; CMRR: 120 dB minimum; interface to PC: optically isolated, serial or optional USB available; batter-ies: internal, rechargeable, optional external 9 volt
battery back up available, AUX (HEG) interface standard. Robust, reliable, upgradeable, easy to use, the industry EEG work-horse. Each: $450.00 ($350.00)
|